The led-driver card is intended to control high-power led-modules at 700mA by a DMX signal. An external power supply AC/DC will provide the card with the required power. A DMX controller controls the intensity of the various output channels.
The aluminium housing is firm and serves as heat conductor.
We have two varieties: one with connector clamps for RGB leds and one with connector clamps for RGBW leds.
Product specifications | |
---|---|
Driver outputs | 12 independent controllable |
Max. load | 700mA / output over max. voltage of 48V in PWM dimming mode |
Protected outputs | fully protected, even for short circuits |
Voltage Input | 6~48V |
Power consumption | 1,2W to 160W depending on configuration of your complete setting |
Rotary wheels | For address settings |
DMX connection | RJ-45 (DMX input and DMX through) |
Stand alone functions | yes |
DIN-rail mountable | yes |
Power connection | Wago cage clamps |
Height | 60mm |
Width | 167mm |
Depth | 110mm |