This driver is capable of driving 1 to 8 channels of led’s at a maximum voltage of 48 volt. This module can drive 2 RGBW luminaries. Each output can be loaded up to maximum 3,5 A.
All channels are protected with a poly-switch, if the current exceeds 7A this protection will be activated. It resets to normal after 1 min.
Power supply must be between 8VDC and 48VDC.
| Product specifications | |
|---|---|
| Driver outputs | 8 |
| Max. load | max. 2,5A load over a voltage of 48V DC in PWM dimming mode |
| Protected outputs | fully protected, even for short circuits |
| Voltage Input | 10~48V |
| Power consumption | max.580W consumption depending on configuration of your complete setup |
| Rotary wheels | For address settings |
| DMX connection | RJ-45 (DMX input and DMX through) |
| Stand alone functions | yes |
| DIN-rail mountable | yes |
| Power connection | Wago cage clamps |
| Height | 60mm |
| Width | 167mm |
| Depth | 110mm |
