The battery protection print is used to connect batteries to a ledstrip.
The LL-PCB-battery protection print:
- protects the battery by the use of fuses
- avoids using the battery at too low voltages
- allows easy switching between charging the battery, turning the leds on and turning the device off
| Product specifications | |
|---|---|
| Input voltages | max.4A/battery input |
| Output voltages | 7,2V, 9,6V, 12V |
| Battery inputs | 3 on wago cage clamps |
| Charger input | 1 on wago cage clamps |
| Switch input | 1 on wago cage clamps |
| Status LED's | for low voltage or overvoltage |
| Output connection | 1, on cage clamps |
| Battery input protection | separated fuse for every battery input |
| IP rate | 20 |
| Ta (max) | +40°C (104 °F) |
| Ta (min) | -15°C (+5°F) |
| Nominal Voltage | Voltage on (V) | Voltage off (V) | Voltage max. (V) | Type of battery | Number of cells |
|---|---|---|---|---|---|
| 7,2V | 7,2 | 6 | 8.5 | NiMh | 6 |
| 9,6V | 9,6 | 8 | 11,6 | NiMh | 8 |
| 12V | 12 | 10 | 14 | Pb | 6 |
Note: Use a charger adapted to the battery type.