7400A-EP - Ethernet - DMX interface - EtherGate - ordering code: 7400A-EPI or 7400-EPO
Computer networking relies heavily on EtherNet technology : a proven system, and a simple technology to distribute data
within an office, building or construction site.
What's more, EtherNet compatible equipment is available off the shelves at attractive prices.
But keep in mind that some equipment designed for office use may not be appropriate for high demands associated with
stage lighting control, and not as robust as required.
|
PROTOCOL CONVERTER
To transport DMX data via EtherNet systems, a protocol converter is required.
That's where the 7400A EtherGate steps in. The board converts one DMX universe into EtherNet format (TCP-IP protocol)
and transmits either linear or compressed data, depending on the user's choice.
Configuration tools are available free from interface support website www.pcdmx.com
|
CONFIGURATION
Each EtherGate can be configured as DMX to EtherNet (7400A-EPI) or
as EtherNet to DMX bridge ( 7400A-EPO).
The configuration is permanent; it can be overwritten by systemreprogramming using a special programming adaptor.
Basic programming is done in the factory, so please state the data direction when ordering!
|
DATA TRANSPORT
Four DMX universes can be selected by the front panel DIP switches,
so multiple DMX links can be established on one EtherNet connection.
Multiple receiver EtherGates can be listening to one transmitter EtherGate.
Alternatively you may choose the user configuration ( GateConfig° mode, which gives unlimited possibilities,
including individual IP address setting and DMX monitoring.
|
DELIVERY
the 7400A interface card comes with a manual and a CD with configuration and test tools. |
PRINTED CIRCUIT BOARD
The interface comes as pcb with RJ45 connector onboard.
The unit requires a regulated and stabilised voltage supply 5V DC, 100mA. |
TECHNICAL DATA
Dimensions: 70mm x 70mm
Indicators: Data, Collision, Power
DMX universes: 4 selectable
DMX channels: 512 channels
Power Supply: Header 2p, 5V DC, 100mA
DMX input: Header 4p |
