 |
 |
|
3405A - 5-way booster/splitter- ordering code: 3405A-FG
Also available without housing : 3405A-EP
DMX BOOSTER / SPLITTER
When wiring DMX systems, some simple rules must be followed:
- all devices have to be connected in line, that is, a cable must never be split
- a single DMX line must never be loaded with more than 32 receivers.
Doing a star-type wiring increases the flexibility of the system.
A splitter / booster regenerates the digital DMX signal and is the source of a number of new DMX lines.
This way, more receivers can be connected without any load problem. |
INCREASED SAFETY
As all inputs and outputs are optically isolated, so defective equipment connected to one output line
will never affect any other line. Ground loops are eliminated, abducted potentials cannot spread around the system.
All this results in increased safety of operation. |
19" RACK VERSIONS
The booster /spltters are also available in 19" rack units.
The 3403A is a 5-way booster/spltter
The 3410A is a 10-way booster/splitter
The 3420A is a 20-way booster/spltter |
TECHNICAL DATA
Dimensions: 100 mm x 160 mm x 35 mm
DMX IN: 1 XLR 5-pin male, Neutrik
DMX THRU: 1 XLR 5-pin female, Neutrik
DMX OUT: 5 XLR 5-pin female, Neutrik
Outputs: SRL-design, opto-isolated
Voltage Supply: 230V AC, 8W |
|
|
