3012C - 12 channel demux - ordering code: 3012C-EP or 3012C-EPM
This 12-channel demux has its own power supply and can be operated on 230V directly.
Since no XLR connectors are present, the demultiplexer is a very cost-effective building block.
DMX input is via screw terminals. |
This pcb also features the separate start adress switch board, which is known from other SLH demux boards.
Again, signalling is via green and red LEDs.
Analog outputs are buffered by extra op-amps. |
The 3012C comes in two basic versions:
-3012C-EP: printed circuit board, 12 channels positive output 0...+10V DC
-3012C-EPM: printed circuit board, 12 channels negative output 0...-10V DC
The 3012C-EPM is intended as a retrofit board for systems requiring negative control voltage.
|
TEST PROGRAMS
Internal test programs allow stand-alone verification and testing.
These programs are available:
Single channel mode:
Addresses 801 to 814: set channel 1 to 14 to 100%
Multi channel mode:
Addresses 901 to 963: set channels 1 to 14 to 100%
Test chasers:
Addresses 997 to 999: different test chasers
|
