lux lumen

3004T-EP (DSI)

Lux Lumen
Kernenergiestr. 53/A
2610 Wilrijk
info@lux-lumen.com

3004T - 8 channel converter - ordering code: 3004T-EP ONLY DSI (slow-version) Dmx decoder to control electronic ballasts that drive fluorescent lighting tubes. Flicker-free Large dimming range, 99% continuous dimming Absolutely identical intensity level for all fluorescent tubes Each unit can be addressed digitally Each fluorescent tube assembly consists of these components: the DMX decoder unit, the digital electronic ballast and the tube itself. The tube and the electronic ballast form a building unit, and the DMX decoder can drive four of these units.
DMX NETWORK TECHNOLOGY This is the most economical way and the fastest way of wiring: the 3004T decoder uses RJ45/CAT5 wiring for the DMX control signal. This allows use of existing in-site building wiring and is familiar to most technicians.
APPLICATIONS The application possibilities for dimmable coloured fluorescent lights are virtually endless. In TV production, horizon lighting saves cost, energy and heat. Show lighting and architectural lighting benefit of the large areas of even illumination.
TECHNICAL DATA Interface card to control up to 8 electronic ballasts for driving fluorescent lighting Dimensions printed circuit board: 90 mm x 160 mm Dimensions separate switch board: approx. 30mm x 60mm Compatibility: DMX512/1990 DMX In/Out: RJ45 DSI Out: 8 channels Power Supply: 230V AC, approx. 3,2W