3004B-H - DMX-DSI/DALI protocol converter - ordering code: 3004B-H
DIGITAL BALLASTS
The modern one4all electronic ballasts for fluorescent tubes can be controlled by DSI and DALI,
and allow continuous dimming from 1% to 100%.
One4all ballasts allow ignition at 1% intensity.
ECO ballasts allow dimming from 1% to 100% but can be controlled by DSI signals only.
|
3004B-H
The 3004B-H is a new version of the well renowned 3004B interface, which now allows DIN rail mounting.
We have also added internal power supply, which lets you connect the interface directly to 230V mains voltage.
No extra PSU module needed.
Additionally, the DMX dara input is galvanically isolated.
Optocouplers increase the safety level and make the equipment fully SELV compatible. |
NO SWITCHES, NO JUMPERS
As compared to devices used on stage, start address setting is not normally required in fixed installations.
Thus the 3004B-H relay module has been set up to support permanent configuration;
all settings are user-definable and are stored in non-volatile memory.
To configure the 3004B-H DMX relay module, our universal programming adaptor 3000P allows direct connection to the module |
2 PROTOCOLS
The 3004B-H supports two protocols: DSI and DALI.
This makes it a versatile and future-proof tool. |
HIGH DRIVE CAPACITY
The 3004B-H supports 4 outputs, which can be loaded with 8 electronic ballasts each,
giving a total of 32 ballasts which can be driven in parallel and in four individual groups.
So when using ballasts for 2 tubes , you can drive 64 fluorescents with only one 3004B-H module. |
TECHNICAL DATA
Standard DIN rail housing , 66mm
4 outputs, max. 8 ballasts
DMX Input, opto-isolated
Inputs and outputs accessible on spring terminals.
Power Supply: 230V AC, approx. 4W
Delivery:
Interface module, manual
Programming adaptor 3000P available as accessory.
3004B-Custom
Home-made printcard for 3004B-H
Makes life easy concerning general installation of your system.
Per output a fuse to protect the general system from failures.
Links can be made from one print to another.
|
