3001R - 2 channel SSR relay card - ordering code: 3001R-EP or 3001R-EPA
This compact "cube" has its own power supply, so it can be used on 115V AC or 230V AC, depending on the model.
It is fitted with contact-free solid state relays, and the output circuits are fitted with a varistor for protection
against overvoltage or voltage spikes. That allows switching of inductive loads, transformers, etc.
DMX input is via the on-board XLR 5-pin connectors.
The XLR connectors serve as mounting posts for the board. |
TECHNICAL DATA
8 relays, switched individually (2 dmx channels).
Switching hysteresis 40/60% or 25/75%, jumper selectable.
DMX line termination resistor switchable by jumper.
DMX HOLD to hold last valid data at signal loss.
Dimensions printed circuit board: 72 mm x 72 mm x 75mm height
Dimensions separate switch board: approx. 30mm x 60mm
DMX IN: XLR 5-pin male, Neutrik
DMX OUT: XLR 5-pin female, Neutrik
Switchload: 2 x max 500W for (3001R-EP) or 2 x 300W (3001R-EPA)
Power Supply: 230V AC, approx. 3W (3001R-EP) or 115V AC, approx. 3W (3001R-EPA)
Equipped with optical coupled SSR 6A
Line/load connectors: spring terminal blocks
|
