The led-driver card is intended to control high-power led-modules at 350mA by a DMX signal. At the outputs a set of high power leds, connected in one serial string of max 15 units per output, is connected. An external power supply AC/DC will provide the card with the required power. A DMX controller controls the intensity of the various output channels.
We have two varieties: one with connector clamps for RGB leds and one with connector clamps for RGBW leds.
| Product specifications | |
|---|---|
| Driver outputs | 12 independent controllable |
| Max. load | 350mA / output over max. voltage of 48V in PWM dimming mode |
| Protected outputs | fully protected, even for short circuits |
| Voltage Input | 6~48V |
| Power consumption | 1,2W to 160W depending on configuration of your complete setting |
| Rotary wheels | For address settings |
| DMX connection | RJ-45 (DMX input and DMX through) |
| Stand alone functions | yes |
| DIN-rail mountable | yes |
| Power connection | Wago cage clamps |
| Height | 60mm |
| Width | 167mm |
| Depth | 110mm |
